Are you tired of spending money on getting your oil and filter changed at the auto shop? Why not learn to do it yourself and save time tire shop near me money in the long run? Changing your oil is an essential part of car maintenance that can improve the performance and longevity of your vehicle. In this comprehensive step-by-step guide, we will walk you through the process of changing your oil and filter at home.
What You'll Need:
Before getting started, gather the following supplies:
Oil filter wrench
Oil drain pan
Funnel
Socket set
New oil filter
New oil (refer to your vehicle's manual for the correct type and amount)
Prepare Your Vehicle
Park your car on a level surface and let the engine cool down.
Lift the front of the car tire repair near me stands for easier access to the oil pan.
Drain the Old Oil
Locate the oil drain plug underneath the car.
Place the oil drain pan beneath the plug and unscrew it using a socket set.
Allow the old oil to drain completely into the pan.
Remove the Old Oil Filter
Use the oil filter wrench to remove the old oil filter.
Be sure to have the oil drain pan ready to catch any remaining oil.
Install the New Oil Filter
Apply a thin layer of oil to the rubber gasket on the new oil filter.
Screw the new oil filter into place using your hands, making sure it is snug but not over-tightened.
Add New Oil
Insert a funnel into the oil fill hole and pour in the recommended amount of new oil.
Check the oil level using the dipstick and add more oil if necessary.
Check for Leaks
Start the engine and let it run for a few minutes.
Inspect around the oil filter and drain plug for any leaks.
Conclusion:
Congratulations! You have successfully changed the oil and filter in your car. By following this step-by-step guide, you can save time and money by performing this essential maintenance task yourself. Be sure to dispose of the old oil properly at a recycling center. For more tips and products for car maintenance, visit Autoworx Shop.
